Plumbing service tips to help you avoid emergencies

Everything You Should Know About Toilet Installation

It’s not often that we think about toilets. Clearly, they’re not something we talk about during dinnertime, nor are they even the most important piece to any home. However, when your toilet decides to stop working, it can cause a headache. That is why it is useful to understand a toilet installation and how it works. Knowing the inner workings of toilets can save yourself the stress associated with plumbing emergencies and inconveniences of broken toilets.

Costly Repairs

The average cost to hire a plumber is $160 to $430 per project in the United States. And on top of that, fees for necessary parts. If you break that number down, that’s about $45 to $150 per hour along with additional fees for parts. Otherwise, plumbers charge a flat fee rate. For a clogged toilet, that fee can easily cost you upwards of about $600.

To extend it further, most replacement parts for toilets average around anywhere from $5 to $50 each, depending on the toilet brand. Also, if you’re neglecting your toilet, it may secretly have hidden costs as well, including leaking water, which results in higher water bills and costly replacements. And if the water leakage continues, your flooring, sub-flooring, ceilings and walls might also need a replacement, depending on how damaging the extent of the leakage is.

So Why Listen to Payless-4-Less Plumbing?

We strive to make sure that our customers are satisfied and when it comes to taking care of your home, nobody does that better than us. Whether your home is in need of a new toilet installation, repair, maintenance, or replacement, we do our best to bring you high-quality service efficiently and effectively. Our trusted and well-trained professionals are available 24/7 and always ready to handle any task that needs completion. When it comes to plumbing, we rely on our expertise to get the job done.

Plumbing Emergencies

If you understand how to prevent toilet-related problems and know what to look for when it comes to toilet maintenance, then you can save yourself a lot of money. It all comes down to fixing that first initial problem, which will help you avoid spending money on an expensive emergency plumber. However, there are some things to be aware of when it comes to a plumbing emergency, such as a pipe burst which can cause serious health and safety concerns. Sewage backups can also cause extensive damage to your home, major disruption to your daily activities, and costly repairs.

Causing Problems Without Knowing It

You’re not alone. A lot of people tend to be their own worst enemy when you find problems with your toilet. However, the more you know about toilet installation, the less likely you are to commit a behavior that puts your plumbing at risk. A lot of people toss things down the toilet that have no business being there. Ultimately, they either experience raw sewage on their property, a pipe burst, expensive bills, and clogged drains.

What You Need to Know

Toilets have a lot of moving parts and over time those moving parts tend to wear out and break down. By being familiar with these parts and what they are used for with toilet installation, you’ll feel more confident knowing how to repair or replace something when you find a problem:

  • Flapper: when you push down on the handle of the toilet, the flapper lifts, allowing water to flow through the trap and into the sewer. Without it, water would flow continuously.
  • Flange and wax ring: the flange and wax ring keep your toilet grounded. The flange is a metal rim attaching one object to another; the wax ring is a rim of wax that creates a seal between the flange and toilet so that water doesn’t leak.
  • Tank: this is the largest part of the toilet. It pushes down water through the main sewage pipe and refills the toilet bowl with water. Once it is empty, a refill mechanism kicks in that refills the tank with new water once again.
  • Float ball: this helps prevent water from entering the toilet tank by rising to an angle that then closes the flapper.
  • Trip lever: trip levers lift the flapper to flush the toilet and mounts on the side of the tank. It often has a metal handle with a brass arm, however, plastic trip levers are growing in popularity since more homeowners are handling their toilets on their own more often.
  • Bowl: Can’t forget about the bowl, where all the gifts go. Toilet bowls are made from porcelain, as they have been for centuries, due to their durability, easiness to clean, smoothness, and low cost.
  • Overflow tube: this part empties directly into the bowl and prevents the tank from overflowing by directing extra water into the bowl. The water that enters the tube raises the water in the bowl to the height of the trap way.
  • Refill tube: this tube directs water into the overflow tube. The water then fills the bowl after every flush and maintains the water level in the bowl.
  • Stop valve: probably the most important part for homeowners to know, the stop valve can open or close by hand. Closing it prevents water from refilling the pipes which prevent flooding. You can find this part located on the back of the toilet to the ground.
  • Supply tube: the most common part to replace when there is a toilet leak, the supply tube is an easy repair in which you connect the toilet tank to the water supply valve.

Don’t get stuck with a toilet installation issue and avoid the costs associated with it – contact Payless-4-Plumbing for any question or problem you have with your plumbing!

Leave a Reply

Your email address will not be published. Required fields are marked *