plumbing repair for outdated features of an older home

Outdated Features That Need Plumbing Repair

Buying a home can be a wonderful experience for many families. Yet, that experience is altered if you’re dealing with outdated features that need plumbing repair. Signs as little as a small leak, a noisy toilet, or a slow flush could be the result of a poor plumbing feature. Out of nowhere, you could be dealing with flooding and raw sewage if something goes wrong with your plumbing system.

Why Choose Payless-4-Plumbing?

The experts at Payless-4-Plumbing understand how frustrating plumbing problems are. That is why we provide high-quality and immediate service for plumbing repair, plumbing service, and sewer and drain cleaning. We are your solution to all things plumbing because our number one priority is you and your home. With 24/7 service, our plumbers are readily prepared to handle any task and get your plumbing system running smoothly!

Stay Ahead

Being on top of your plumbing system is great and if you’re proactive about it when purchasing an older home, you can save yourself a lot of time and money. Having a professional come in to inspect the home for any potential problems will take you a long way. Ignoring the warning of signs can do so much damage. Ultimately, the longer you wait, the more expensive the plumbing repair is. So, make sure to check all utilities and areas of your home that could be affected by a poor plumbing system, including your walls and floors, furnishings, and carpets. It is smart to ask either your real estate agent or the previous homeowner if you can conduct an inspection of your home’s plumbing system. Camera inspections are especially helpful in the case of an older home. They are used to assess major plumbing problems and can give the plumber an idea of where a potential plumbing repair is needed.

Outdated Features

If you suspect that something is wrong with your plumbing system, then don’t hesitate any longer to schedule a plumbing repair. It is important to maintain a great plumbing system, so look out for these 5 common outdated plumbing features, especially if you live in an older home.

  1. Galvanized Plumbing – If the home you live in was built before the 1960s, then it’s likely that galvanized plumbing was installed. Galvanized plumbing uses zinc as an added layer of protection on top of steel pipes. The problem with galvanized plumbing, however, is that zinc erosion occurs after several decades of usage. The quality of water is compromised due to the decrease in water pressure. And thus, the plumbing initially installed is useless.
  2. Polybutylene Plumbing – After learning how insufficient galvanized plumbing was, plumbers began using polybutylene plumbing in the late seventies up to the mid-1990’s. However, over time the plastic used for this type of plumbing feature starts failing and forms small cracks and fissures. The reason for this is because chlorine and other oxidants found in public water supply damages these pipes affecting the entire home.
  3. Lead Service Lines – Lead service lines also pose a significant risk to water quality over time. These lines are used mainly as the connector between outside service lines and your home, however, the lead often leaks into the water supply due to chemicals. Your service line must be replaced immediately if you find lead in your water. It’s a good idea to have your water supplier test out your tap water to see if the water might be contaminated.
  4. Concrete or Cast Iron Pipes – These pipes are found in many older homes as well. The problem with cast iron pipes is that they are only durable for 20 to 30 years. Over time the iron will start to disintegrate, which results in soil erosion. Even though concrete can last for a significant amount of time, natural shifting of the home and the movement of the ground causes major problems for these pipes. These systems are hard to trace if they are installed beneath the home. The house could be settled on top of the disintegrated cast iron or concrete piping.
  5. Belly – A belly means your sewer line was not bedded or set correctly during installation. A belly or dip in the line is a sagging place in the piping system. This sag allows for sewage or sediments to settle and clog the line, restricting flow. Simply put, bedding is the process of correctly adjusting the surrounding area of where the pipe is laid, and the after results can be damaging.

Don’t be naïve when it comes to your plumbing system – if you’re in need of a plumbing repair, then call Payless-4-Plumbing today for immediate service!

Leave a Reply

Your email address will not be published. Required fields are marked *